Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Oxygen inhibition in thiol–acrylate photopolymerizations

The overall effects of oxygen on thiol–acrylate photopolymerizations were characterized. Specially, the choice of thiol monomer chemistry, functionality, and concentration on the extent of oxygen inhibition were considered. As thiol concentration was increased, the degree of oxygen inhibition was greatly reduced because of chain transfer from the peroxy radical to the thiol. When comparing the copolymerization of 1,6‐hexanediol diacrylate with the alkane‐based thiol (1,6‐hexane dithiol) to the copolymerization with the propionate thiol (glycol dimercaptopropionate), it was found that the propionate system was much more reactive and polymerized to a greater extent in the presence of oxygen. In addition, the functionality was considered where the glycol dimercaptopropionate was compared to a tetrafunctional propionate of similar chemistry (pentaerythritol tetrakis(mercaptopropionate)). Given the same thiol concentration, the higher functionality thiol imparted a faster polymerization rate, due to the increased polymer system viscosity, which limited oxygen diffusion and decreased the extent of overall oxygen inhibition. Thus, preliminary insight is provided into how thiol monomer choice affects the extent of oxygen inhibition in thiol–acrylate photopolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2007–2014, 2006     

Uniform oriented matroids without the isotopy property

We give an easy general construction for uniform oriented matroids with disconnected realization space. This disproves the longstanding isotopy conjecture for simple line arrangements or order types in the plane.The research of Bernd Sturmfels and Neil White was supported in part by the Institute for Mathematics and Its Applications with funds provided by the National Science Foundation.     

Rapid multielemental analysis of Chinese reference soils by laser ablation inductively coupled plasma-source mass spectrometry

Summary Laser ablation inductively coupled plasma-source mass spectrometry has been used to determine thirty elements (Na, Mg, Al, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, As, Rb, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Dy, Ho, Yb, Hf, Ta, W, Th, U) in seven Chinese reference soils. The Surrey prototype spectrometer was employed with sample ablation by a free-running ruby laser. Concentrations in the soils (GSS-2 to GSS-8) were calculated from elemental responses and sensitivities derived from another soil in the series, namely GSS-1. Comparisons with previous neutron activation analyses are made. Rapid semiquantitative analyses are proved feasible. About eighty percent of the LA-ICP-MS determined concentrations were within a factor of two of the concentrations measured by INAA, and many were considerably closer than this. Precisions were typically in the range 2–10% RSD, but some were considerably poorer for elements present at trace levels.     

Investigation of the degradation of commercial polyoxymethylene copolymer in water service applications

An investigation has been carried out on the influence of degradation on various properties of commercial polyoxymethylene (POM) copolymer fittings in chlorinated cold water service lines. Scanning electron microscope (SEM) was used to document interior bulk morphological changes and typical defects. The various types of irregular cracks and pits were observed at the innerface of the samples. DSC and intrinsic viscosity determination were carried out for investigation of crystallinity and molecular weight changes. It was seen that the crystallinity of the POM increases at a much higher rate at the inner surface layers than the outer layer in the used samples. The FT-IR spectra of the new and used samples indicate the extent of degradation of the samples.     

Critical limit one-point correlations of monodromy fields on 321-1321-1321-1

Monodromy fields on ?² are a family of lattice fields in two dimensions which are a natural generalization of the two dimensional Ising field occurring in theC ^*-algebra approach to Statistical Mechanics. A criterion for the critical limit one point correlation of the monodromy field σ_a(M) at a ∈ ?², $$\mathop {\lim }\limits_{s \uparrow 1} \left\langle {\sigma _a (M)} \right\rangle ,$$ is deduced for matrices M ∈ GL(p,?) having non-negative eigenvalues. Using this criterion non-identity 2×2 matrices are found with finite critical limit one point correlation. The general set ofp×p matrices with finite critical limit one point correlations is also considered and a conjecture for the critical limitn point correlations postulated.     

A Bibliography on the Applications of Mathematical Programming Multiple-objective Methods

This paper gives a bibliography on applications of multiple-objective methods which use no a priori explicit value function and are complex enough to require mathematical programming aids. A commentary on the applications and on the survey is also given which may be helpful for further work of this kind. The survey covers the period 1955-86.     

Kaon production in\bar pp interactions at c.m. energies from 200 to 900 GeV

A detailed analysis ofK _s ⁰ production in \(\bar pp\) |<2.5 the average transverse momentum is found to be 0.53±0.07 GeV/c at 200 GeV and 0.62±0.08 GeV/c at 900 GeV, which is an increase with respect to data at c.m. energies below 60 GeV. TheK _s ⁰ production cross sections in inelastic collisions are 29±4 mb at 200 GeV and 63±6 mb at 900 GeV, showing an increase compared to lower energy data. The central kaon density is found to increase as a logarithmic function of energy. At 900 GeV, where statistics are sufficient to allow one to draw conclusions, the average transverse momentum is higher in events with large charged multiplicity than in events with low multiplicity.     

Observation and analysis ofE mesons in\bar p p annihilation at rest in H2 gas

Antiproton-proton annihilation at rest in a gaseous H₂ target at NTP into the final state π⁺ π^? K ^± π^? (K ⁰) with an undetectedK ⁰ or \(\bar K^0 \) has been investigated. We observe theE(1420) resonance in the invariant mass spectrum (K ⁰)_miss K ^± π^? with massM _E =1413±8 MeV/c² and widthГ ^E =62 ± 16MeV/c² and find evidence for the production of thef ₁(1285). The absolute branching ratio of \(\bar p\) p → π⁺ π^? E ⁰,E ⁰ →K ₀ ^L K ^± π ^? at (61±6)%P wave annihilation is (3.0±0.9)·10^?4 of all annihilations. The observed suppression of theE production fromP wave with respect to theS wave together with some simple selection rules suggest that the quantum numbers of theE(1420) areJ ^pc=0^?+ and not I⁺⁺.